Maintenance
Throughout the entire period of its use, maintain the cleanliness of the device and the surfaces around it.
Regular Maintenance
Once a month, clean the device using a cloth and water or another non-aggressive cleaning agent.
Stainless Steel Maintenance
Every 3 months, preserve the stainless steel by applying stainless steel cleaner and stainless steel preserving spray.
Screw Maintenance
Every 6 months, check the tightness of all screws and nuts.
Routine Maintenance
- a) Soft microfiber or cotton cloth (1 piece)
- b) Bottle of water 0.5 liters water can be replaced with another non-aggressive cleaning agent
- c) Spray — Quincy OS 777
- d) Soft microfiber or cotton cloth (1 piece)
- a)
Using a cloth and a small amount of water, we clean the entire device from current dirt and grime.
- b)
Visually inspect the device for any damage.
- c)
Ready — repeat after a month.
- d)
Optionally, we can use the "Spray — Quincy OS 777", which we spray on all stainless steel elements of the device.
- e)
After a minute, using a second cloth, we wipe the entire device.
Stainless Steel Maintenance
- a)Cream Cleaner — Quincy Plus 5000
- b)Spray — Quincy OS 777
- c)Soft microfiber or cotton cloth (4 pieces)
- d) Bottle of water 0.5 liters water can be replaced with another non-aggressive cleaning agent
- a)
Using the first cloth and a small amount of water, we clean the entire device from current dirt and grime.
- b)
After cleaning the current dirt, we apply a small amount of the product "Cream Cleaner — Quincy Plus 5000" to several different parts of the device.
- c)
Using the second cloth, we spread the cream over the entire stainless steel surface of the device.
- d)
Wait 10 minutes.
- e)
After 10 minutes, we thoroughly wipe the entire device using the third cloth.
- f)
Then apply the "Spray — Quincy OS 777" and spray all stainless steel elements of the device.
- g)
After a minute, using the fourth cloth, we wipe the entire device.
- h)
Ready — repeat after 3 months.
Screw Maintenance
- a)Flat wrench size 13 (1 piece)
- b)Flat wrench size 17 (2 pieces)
- c)Flat wrench size 19 (2 pieces)
- d)Flat wrench size 24 (2 pieces)
- e)Flat screwdriver (1 piece)
- a)
Using a screwdriver, we remove all plastic caps protecting the screws.
- b)
Using the appropriate wrenches, we check the proper tightening of all screws and nuts.
- c)
Ready — repeat after 6 months.